How To Temporarily Release The V-Chip Block; Reactivating The Temporarily Released V-Chip Block; Returning To Factory Presets - HP Pavilion Serie Mode D'emploi

mb5ltvsh.book Page 69 Monday, June 27, 2005 1:58 PM
How to temporarily release the
V-Chip BLOCK
When the V-Chip is working and censors a broadcast,
a message displays:
V-CHIP HAS BEEN ACTIVATED.
1
Press Select while the V-Chip is working and then
the secret number setting menu displays.
2
Enter your 4-digit secret number with 0–9. At this
time V-CHIP BLOCK temporarily releases.
Reactivating the temporarily
released V-Chip BLOCK
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.

Returning to Factory Presets

Use this procedure to set all items (except TV channel)
to return to the factory presetting.
1
Check that the power indicator is not on. If
necessary turn off the TV.
2
Remove the AC cord.
3
Press and hold down RESET (A) at the same time
as you re-insert the AC Cord into the outlet and
switch on the TV.
Running the factory presetting operation
also clears the secret number.
n
Method 1:
Select Status setting from the Parental CTRL menu to
reactivate BLOCK.
Method 2:
Select V-Chip setting (MPAA, TV Guidelines, Can.
English Ratings, or Can. French Ratings) from the
Parental CTRL to reactivate BLOCK.
Method 3:
Switch off the TV power.
n
Performing any of the three methods
above activates the V-CHIP BLOCK.
A
A: Reset button
Changing the TV Settings
69