Connecting A Vcr For Recording; Connecting A Pc - HP Pavilion Serie Mode D'emploi

mb5ltvsh.book Page 23 Monday, June 27, 2005 1:58 PM

Connecting a VCR for recording

1
Connect the VCR output (C) for playback using the
Input 3 connectors, either S-video or AV video
(composite); see the previous procedure,
"Connecting an S-video or AV video device" on
page 22.
2
Connect the VCR for recording by connecting the
input to the VCR (E) to the Monitor Out/Rec Out
terminals; use the S-video connector or the video
connector. The two terminals share the audio
connectors. The figure shows using the video
connectors and an AV cable (D).
The S-video terminal has priority over the
■
video terminal.
A
B
C
n
D
E
A: S-video cable to Input 3
B: Video cable to Input 3
C: VCR output connectors
D: Video cable from Monitor Out/Rec Out to
VCR input
E: VCR input (composite video and audio)
connectors
3
Define the screen size to record in the Menu
screen display; see REC Picture Size under "Using
the Video Setup" on page 62.

Connecting a PC

Use these instructions when connecting a PC or other
source equipment to the TV Input 5 terminal to view the
PC desktop as a selectable input source. You can use a
a DVI-I cable (sold separately) or RGB-to-DVI
conversion cable (sold separately).
n
Refer to "PC Compatibility Chart" on
page 77 for a list of PC signals compatible
with the TV.
c
CAUTION: Unplug power for the TV and all
connected components before connecting a
PC. Ensure that the PC is powered off.
1
Connect the PC or source equipment video cable
to the TV by using Input 5 (A).
For a DVI-I connector on your PC, use a DVI-I
■
cable (sold separately).
Or
For a VGA connector on your PC, use a
■
RGB-to-DVI conversion cable (sold separately).
23
Setting Up