Rbm84 Turnstile Confi Guration - CAME RBM84 - HW Manuel D'utilisation

10
RBM84 Turnstile confi guration
The turnstile must be confi gured and numbered via functions 11 and 12 in order to perform operations in the RBM84
system, as shown hereafter.
Function 11: Stand Alone or OnLine mode
In Stand-Alone (OFF) the turnstile works automatically, while On-Line (ON) the turnstile is connected and controlled by RBM84.
(for 10 cycles)
+
F - 10
F - 11
F - 12
Function 12: Device number.
Assign the position inside the RBM84 circuit to each turnstile.
(for 11 cycles)
+
F - 11
F - 12
F - 13
RBM84 - Hardware and connections
Esc
OFF
Esc
1
ON
2
60
3