Interface Confi Guration - CAME QBEMFSB2 Mode D'emploi

Status System Network
Interfaces - LAN
Network interface confi guration
Interface confi guration
General Settings
Protocol
Static Address
IP address
Netmask
Gateway
DNS
Back
General Options Exit
D D
E E
F F
G G
H H
Save & apply
Interfaces confi guration
The WWAN interface (Wi-Fi) confi guration is similar to the
LAN (Ethernet) interface.
D Choose the type of addressing between Static and DHCP.
[Static Address]
The device's IP address is manually assigned.
E If you have chosen a static IP address, enter the device's IP,
which must belong to the same subnet as that of the router and
of the other connected devices.
F If the netmask is diff erent from the default one, indicate the
correct netmask.
G Provide the default gateway for your network.
H Enter a valid DNS address to have the CAMEConnect
connection (for example, 8.8.8.8.).
[DHCP]
The device's IP address is manually assigned by the DHCP
server; if there are no special needs, this mode lets you continue
with the settings without adding any additional data.