What Rbm84 Is - CAME RBM84 - HW Manuel D'utilisation

RBM84 - Hardware and connections
3

What RBM84 is

The system and its software can manage up to 5500 users.
RBM84 is an integrated access control system completely controlled by a Personal Computer.
The base confi guration comprises two devices, RBM84 and PC30, and a proprietary software that is easy to install and use on a PC
running Windows OS (Xp/Windows7/Windows8, Professional versions).
The RBM84 card is the heart of the system, and can be installed remotely from the computer (max 1000 m) as all programming/
modifi cation/control functions are handled by the software.
PC30 should instead be installed in the vicinity of the computer (max 5 m), as it is an indispensable tool for programming the control
devices connected. PC30 unites all the decoders required to store all compatible Came control devices:
- Transmitters of the series Atomo, Tam, Top, TWIN (in TOP, TAM mode).
- S5000, S6000 and S7000 keyboard selectors;
- TSP00 sensor for transponder card.
- LT001 reader for magnetic stripe cards.
- WAVE sensors (WA01).
- Twister and Guardian turnstiles.
The number of these devices varies depending on the type of system.
The basic confi guration can manage and control up to 8 operators (doors, gates, bars, etc.) with 4 control devices; There are also 8
digital inputs for connecting alarms, emergency locks, traffi c lights, sensitive mats , etc.
Up to 60 Rem expansion devices or 60 Twister/Guardian turnstiles can be added to this confi guration, used simultaneously with-
out exceeding 60 units. In addition, up to 8 Wave sensors can be connected.
The system can manage and control up to 128 operators via 124 sensors and 128 digital inputs.
REM is an expansion card created to extend the capabilities of RBM84 in terms of equipment and / or devices connected (not neces-
sarily both); they are connected to each other via a serial cable whose total length must not exceed 1000 m where RBM84 can be
installed at the starting point (single line connection) or in an intermediate position (two-line connection).
The turnstiles are bidirectional electromechanical devices for regulating transit in high fl ow areas.
Wave WA01 is a proximity sensor with graphic display for an additional output.