Minimum Enclosure Clearances - Napoleon GSS48 Mode D'emploi

10
GSS48 (ONE SIDED)

Minimum Enclosure Clearances

EN
WARNING!
cement board, ceramic tile, marble, paint etc. When adding finishing materials to the appliance. Do
not use wood or drywall.
WARNING!
and connected to the gas supply in order to safely turn off the burner.
36"
(914mm)
minimum
to ceiling.
60 3/4"
(1543mm)
minimum
to ceiling.
24 3/4" (629mm)
Including 1/8"
(3mm) clearance
per side.
(152mm)
6"
(152mm)
minimum to
floor
NOTE!
Ensure top of cabinet is closed to
prevent rain and debris from falling on top of
the appliance.
www.napoleongrills.com
Use only non-combustible materials (certified to ASTM E-136) such as steel studs,
You must have clear and easy access to the on/off valve AFTER the appliance is installed
NON COMBUSTIBLE
6"
6"
(152mm)
36"
(914mm)
minimum
to ceiling.
6"
(152mm)
minimum to
floor
1 1/2"
(38mm)
6"
(152mm)
50 3/4" (1289mm)
(Including 1/8" (3mm)
clearance per side)
Gas and electrical lines protude from the
bottom of the appliance located on the
All material in shaded
area must be Non
Combustible. (including
framing, sheeting and
finishing materials).
Certified to ASTM E-136
1/2"(13mm)
Cement Board
6"(152mm)
6" (152mm)
(Minimum
clearance to
combustibles)
All material in shaded
area must be Non
Combustible. (including
framing, sheeting and
finishing materials).
Certified to ASTM E-136
Nailing Tabs (4 per side)
right side.
Steel Stud