Installation
Nailing Tabs
To install the appliance face flush with the finished surface, position the framework to accommodate the
thickness of the finished surface. Screw the nailing tabs to either side of the appliance and secure to the
2 x 4 steel framing. The tabs will facilitate the installation of either a 1/2"(13mm) or 3/4"(19mm) finished
surface thickness.
Clearance to Combustibles
WARNING!
Minimum clearance to combustibles must be maintained or a serious fire hazard could
result.
Clearance
A
From Ground or other surface
B
From Sides
C
From Ceiling
D
Alcove Width
E
Alcove Depth
E
A
Minimum Clearance To Combustibles
B
D
Dimension
6" (152mm)
6" (152mm)
36" (915mm)
60" (1524mm) Minimum
24" (610mm) Maximum
C
www.napoleongrills.com
9
EN