Locking / Unlocking; Connecting A Power Pack (Accessory) - Metz mecablitz 64 AF-1 digital Mode D'emploi

11.10 Locking / unlocking

The setting on the flash unit can be locked
against unintended changes.
To lock or unlock, hold down the
button for approximately 3 seconds.
On the screen, all the sensor buttons are
shown in white and can no longer be acces-
sed.
Only the INFO sensor button can be pressed.
11.11 Connecting a power pack
(accessory)
A power pack (accessory) can be connected
to the flash unit using port .
You need a connection cable (special acces-
sory) to connect the power pack.
The power pack extends the operating time
of the flash unit and provides faster flash
recycling times.
D
OPTION
OPTION
m/ft
POWERPACK
AF BEAM
q
POWERPACK O
Setting procedure
D
• Press the button as often as it takes
for the selection menu to appear.
OPTION
• Press the sensor button on the
touch display.
O
• Press the sensor buttons on the
touch display and select
POWERPACK
• Press the
p
touch display.
• On the touch display, press the
sensor button for a very fast recycling time
or the sensor button for a fast recycling
time.
The setting is adopted immediately.
POWERPACK
.
sensor button on the
k
181