Installation Instructions - Truma Panel BC 616 Mode D'emploi / Instructions De Montage

Installation instructions

Remove the equipment pack (accessories) and check it is
complete:
1 instructions for installation and use
1 4-wire control cable, 5 m long
2 mounting screws
Assembly
Install the panel in a place that is protected from damp and wet.
Prepare an installation opening for the device.
Dimensions in mm.
32
R 4
Dia 1.5
Connect the BC (616) panel via the control cable to the
"Connection for the charge control panel" of the charger.
Attach the device with the supplied screws.
7