Finishing; Ax42 Log Placement - Napoleon Altitude X AX36NTE Manuel D'installation

fi nishing
EN
9.3

AX42 log placement

WARNING
!
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
TM
PHAZER logs and glowing embers exclusive to Napoleon, provide a unique and realistic glowing effect that is dif-
ferent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log
colours may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments
burn in during the heat activated curing process. Blocked burner ports can cause an incorrect fl ame pattern.
Driftwood log set (AX42)
Maple log set (AX42)
Refer to leafl et provided with kit for log placement instructions.
38
W415-1935 / C / 01.13.20
Oak log set (AX42)
Birch log set (AX42)