Fi Nishing Fl Ange Adjustment - Napoleon Altitude X AX36NTE Manuel D'installation

9.6 fi nishing fl ange adjustment
Depending on the thickness of fi nishing material we have allowed up to 3/4" (19mm) of adjustment after the 1/2"
(13mm) combustible board has been installed. Adjust the fi nishing fl ange to the desired position.
Finishing
material
Finishing flange (the finishing flange defines the perimeter
of the fireplace opening. Framing or finishing materials must
NEVER encroach inside the finishing flange).
note:
Screw count varies by model.
Finishing
fl ange
AX36
illustrated.
fi nishing
3/4" max.
W415-1935 / C / 01.13.20
EN
41