Before You Call For Service - Alliance Laundry Systems D310IE3B Manuel D'installation

Before You Call For Service

You may save time and money by checking the following:
If the Washer:
Won't Won't
Fill Start
• •
•
• •
•
•
• •
•
•
•
• •
200712
Won't Won't
Agitate Spin
• • Be sure power cord is plugged all the way into the electrical outlet.
Close the loading door.
• •
• • Check the house fuse or circuit breaker.
Has the motor overload protector cycled?
• •
Turn on the hot and cold water faucets.
• •
Pull timer knob out to start the washer.
Was the last spin completed?
Clean the screens in the water mixing valve and the filter screens in the
fill hoses.
Water is siphoned from the washer during the cycle. Refer to the
INSTALLATION INSTRUCTIONS supplied with the washer.
Are controls properly set?
Broken drive belt. Call the service person.
• •
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Possible Reason —
Do This To Correct
Maintenance
23