Using Configuration; Introduction; Defining A User Surface Configuration - Struers TegraDoser-5 Mode D'emploi

Introduction

Defining a User Surface
Configuration
44
TegraDoser-5
Instruction Manual

5. Using Configuration

Although the Configuration Menu enables you to change the Display
Contrast setting and define the contents of the suspension and
lubrication bottles connected to the TegraDoser-5 (both of which are
described in Chapter 2), it also allows you to define new user-defined
polishing surfaces, lubricants and suspensions.
Using this option, it is possible to define up to 10 new user-defined
surfaces. You are able to define the name, the abrasive rule and
lubricant rule for each surface.
To define these parameters:

With the MAIN MENU displayed.

Use the Arrow buttons to select Configuration.



Press ENTER
CONFIGURATION MENU.


Use the Arrow buttons

 User Surface Configuration.


Press ENTER
USER SURFACE CONFIGURATION menu.


to activate the
to select


to activate the