Editing New Alphanumeric Values - Using The Text Editor - Struers TegraDoser-5 Mode D'emploi

Editing New Alphanumeric
Values - Using the Text Editor
TegraDoser-5
Instruction Manual
When new alphanumeric values need to be defined, for example
when naming "User defined" consumables (suspensions, lubricants
and surfaces) in the CONFIGURATION MENU or renaming Method
Groups or User Methods then the TEXT EDITOR is used.
Use the Arrow buttons

changed:




Press ENTER
TEXT EDITOR.

Name field
The F# key functions are associated with the text

displayed in the Name field. Use them to position the
cursor in the correct part of the text string, accept and
delete the text string displayed.
 Use the Arrow buttons

alphanumeric pad and highlight the correct character.


Press ENTER
Repeat the last 2 steps until the desired text string is

displayed in the Name field:
F2
Press F2 to accept the text string.
to select the value to be

or
Press F4 to start TEXT

to start
F4
EDITOR.
to move around the


to select the highlighted character.
15