Cleaning And Routine Care - VWR INCU-Line ILS4 Manuel D'instructions

8
Section

CLEANING AND ROUTINE CARE

No routine maintenance is required for the electrical or mechanical components of the
unit. Both the interior and exterior of the shaking incubator should be wiped down with a
soft cloth periodically to prevent any build-up of dust and grime.
Any spills in the shaking incubator should be cleaned immediately. Cleaning may be
performed with a soft, damp cloth. If required, the chamber may be disinfected. Before
using any type of disinfectant or cleaning agent in the shaking incubator, contact VWR
Customer Service Department to ensure that the product will not damage the stainless
steel interior of the shaking incubator. After cleaning the shaking incubator, rinse the
cleaned surface with a damp cloth, using water only. Dry with a clean cloth.
Do not pour liquid into the chamber or immerse the unit in liquid. DO NOT use chlorine-
based bleaches or abrasives as these will damage the stainless steel.