Additional Operations - VWR INCU-Line ILS4 Manuel D'instructions

7.6

ADDITIONAL OPERATIONS

• Door Open Switch: This switch senses when the incubator shaker door is open
and sends a signal to microprocessor which causes the shaker to stop running
as a safety measure. The timer will pause and re-start when door is closed.
• If you want to view the set value for RPM during shaking rotate the Control Knob
for ONE CLICK right (+) or left (-). The RPM signal light will then flash for 2 sec
and the display will show the set RPM. After 2 sec the RPM and the light will stop
flashing.
NOTE: Shaker must be in RPM mode – RPM signal light must be on.
• If you want to view the set value for TIME during shaking rotate the Control Knob
ONE CLICK right (+) or left (-). The TIME signal light for 2 sec and the display
will show the set TIME. After 2 sec the display will return to the count TIME and
the signal light will stop flashing.
NOTE: Shaker must be in TIME mode – TIME signal light must be on.