Reviewing Test Results
Your device stores the 450 most recent test results along with
respective dates and times in its memory. To enter the device
memory, start with the device switched off.
To review all test results, do the following:
Step 1: Press M.
will appear on the display. Press M again, and the first
"
"
reading you see is the last blood glucose result along with
date, time and the measuring mode.
Step 2: Press M to recall the test results stored in the meter
each time you press.
Step 3: Exit the meter memory.
After the last test results, press M again and the meter will be
turned off.
To review the day-average test results, do the following:
Step 1: Press M.
When
appears on the display, keep pressing M for 3
"
"
seconds until the flashing "
then your 7-day average result measured in general mode
will appear on the display.
EN-13
" appears. Release M and