Reviewing Test Results - Fora 6 Plus Manuel De L'utilisateur

printed on the test strip vial, it means that the meter and
strips might not be working properly. Please contact your
local customer service or place of purchase for assistance.

Reviewing Test Results

Your device stores the 1000 most recent test results along
with respective dates and times in its memory. To enter the
device memory, start with the device switched off.
To review all test results, do the following:
1. Press and release MAIN button or
appears on the screen.
2. Press MAIN to review the test results stored in the device.
Press or repeatedly to review other test results stored
in the device. After the last test result, press MAIN again
and the device will be turned off.
(100 mg/dL = 5.5 mmol/L; 200 mg/dL = 11.1 mmol/L)
. The " " icon
EN-13
To review the day-average test results, do the following:
1. Press and release to enter memory mode for average
results with " " and
Release MAIN and then your 7-day average result
measured in general mode will appear on the display.
2. Press or to review 14, 21, 28, 60 and 90-day average
results stored in each measuring mode in the order of Gen,
AC, then PC.
Note:
• Press and hold MAIN for 5 seconds to exit the memory
mode or leave it without any action for 3 minutes. The
device will turn off automatically.
• If using the device for the first time, the "---" icon will
appear when you recall the test results or review the
average result. This indicates that there is no test result in
the memory.
• Control solution results are NOT included in the day
average.
displayed on the screen.