Getting Started; Initial Setup - Fora COMFORT plus G30a Manuel De L'utilisateur

Getting Started

Initial Setup

Before using your meter for the first time or if you change the
meter battery, you should check and update these settings.
Make sure you complete the steps below and have your
desired settings saved.
► Entering the Setting Mode.
Start with the meter off (no test strip inserted). Press SET to
turn on the meter.
BATTERY
SET
Step 1: Setting the date.
With the year flashing, press M until the correct year appears.
Press SET.
With the month flashing, press M until the correct month
appears. Press SET.
With the day flashing, press M until the correct day appears.
Press SET.
Step 2: Setting the time format.
Press M and release to select the desired time format --- 12h
or 24h. Press SET.
Step 3: Setting the time.
With the hour flashing, press M until the correct hour
appears. Press SET.
With the minute flashing, press M until the correct minute
appears. Press SET.
EN-4