Transferring Data - Fora COMFORT plus G30a Manuel De L'utilisateur

Step 3: Exit the meter memory.
Keep pressing M and the meter will turn off after displaying
the last test result.
Note:
• Any time you wish to exit the memory, keep pressing M for 5
seconds or leave it without any action for 3 minutes. The meter
will switch off automatically.
• Control solution results are NOT included in the day average.
• If using the meter for the first time, "---" displays when you recall
the test results or review the average result. It indicates that
there is no test result in the memory.
Announcement of Memory Result by
Universal Tone
Only the most recent result that was saved can be
announced acoustically. If you press M to turn the meter on,
you will first hear the Long-Beep which stands for power-on
and then the most recent result.
Only the average for the last 7 days is announced
acoustically. If the 7-day average cannot be calculated, three
horizontal bars are displayed. This is signaled acoustically
with 3 long beeps representing 3 zeroes.

Transferring Data

You can use the meter with an interface cable and the Health
Care Software System to view your test results on your
personal computer.
To learn more about the Health Care Software System or to
obtain an interface cable separately, please contact local
customer services or the place of purchase for assistance.
Data Transmission Via RS-232 Cable
Step 1: Obtaining the required cable and installing the
software.
To download the Health Care Software System, please visit
the ForaCare Suisse AG, website at www.foracare.ch.
EN-15