Using Framelits ™ , Thinlits ™ , Triplits ™
Die
1. Place die on Cutting Pad. Place material over die and align. Place another
Cutting Pad over the material and die to create a "sandwich."
2. Use the forward/reverse switch to select the proper direction. Slide
"sandwich," Platform into the roller opening as far as it will go. Push in on
the side flaps to align the "sandwich" and gently press the motor button.
When the "sandwich" is completely through the rollers, then and only
then is it safe to remove or handle your die and die-cut shape.
and Other Thin Dies
Platform
"Sandwich"
Platform
Cutting Pads
Paper
Thin Die Adapter
Thin Die Adapter