SIZZIX Vagabond 2 Mode D'emploi page 9

Using Sizzlits® and Clearlits™
1
1. Place Sizzlits Die onto a Cutting Pad with foam side up. Place paper
over the die. Place another Cutting Pad over the paper to create a
"sandwich." For Clearlits Die, place die over photo or material so that
the area to be cut shows through the die. Then place photo or material
and die between Cutting Pads to make "sandwich." Place "sandwich" on
Platform.
2
2. Use the forward/reverse switch to select the proper direction. Slide
"sandwich" into the roller opening as far as it will go. Push in on the side
flaps to align the "sandwich" and gently press the motor button. When
the die "sandwich" is completely through the rollers, then and only then
is it safe to remove or handle your die and die-cut shape.
Using Sizzlits and clearlits
Paper
Die
Using Sizzlits and clearlits
Platform
"Sandwich"
Platform
Cutting Pads