SIZZIX BIGkick Mode D'emploi

The Sizzix BIGkick™ Machine is exactly what crafters have been
®
looking for – a versatile, easy-to-use and affordable multipurpose
creative system. It is designed to cut and emboss for creating
unlimited fun projects. Using Sizzix Originals™,
Bigz™, Sizzlits , Clearlits™, Embosslits™, Thinlits™ and
®
Framelits™ Dies, as well as Textured Impressions™, Texture
Trades™ and Texture Fades™ Embossing Folders and Texturz™
Texture Plates, crafters can now express their creativity in
minutes. Start unleashing the limitless possibilities of your
BIGkick to create a combination of dazzling designs.
Assembly Instructions
Before attaching handle, remove protective cap on crank shaft and
discard. Then attach handle by sliding washer over hex screw and
inserting through handle and into crank shaft. Tighten hex screw
with hex wrench provided with handle kit. Press end plug over hex
screw until firmly sealed.
Using a Sizzlits or Clearlits Die
Paper
Die
Extended Multipurpose Platform
(Tab 1)
Place Sizzlits Die onto a Cutting Pad with foam side up. Place
paper over the die. Place another Cutting Pad over the paper to
create a "sandwich." For Clearlits Die, place die over photo or
material so that the area to be cut shows through the die.
Then place photo or material and die between Cutting Pads to
make sandwich.
Extended Multipurpose Platform
Place sandwich on Extended Multipurpose Platform and slide
Platform into opening of BIGkick. Note the rotation of the handle
and continue to rotate it in the same direction until the Platform
has passed through the opening and the rollers. Remove Platform
from BIGkick. Your die-cut shape is ready to use!
Crank Shaft
Washer
Hex Screw
End Plug
Handle
Protective Cap
Cutting
Pads
"Sandwich"
IMPORTANT SAFETY INSTRUCTIONS
WARNING
– When using this product, basic
precautions should always be followed, including the following:
a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is necessary
when this machine is used near children.
c) Do not contact moving parts.
d) Only use attachments recommended or sold by the
manufacturer.
e) Do not use outdoors.
f) Always place and operate this machine on a clean, flat
surface.
g) PINCH HAZARD. AVOID ROLLERS.
h) DO NOT OVERLOAD THE MACHINE.
i) CUTTING HAZARD. AVOID CONTACT WITH THE DIE
BLADE.
j) ADULT SUPERVISION OF CHILDREN RECOMMENDED.
SAVE THESE INSTRUCTIONS
Warranty
This product comes with a limited warranty. Visit Sizzix.com/warranties
for details.
Notices
US & Intl Patents (see sizzix.com/legal)
Brevets de USA et Intl (visitez sizzix.com/legal)
Patentes de EE.UU. y Intl (visita sizzix.com/legal)
For customer support, please visit Sizzix.com
866-742-4447 toll-free in USA
949-598-5897 outside USA
For European customer support, please visit www.sizzix.co.uk
within UK: 0844 499 8181
outside UK: +44 (0) 845 345 2277
Made in China
Using Originals, Bigz or Bigz XL Dies
Cutting Pad
Paper
Die
Cutting Pad
Place an Originals or Bigz Die on a Cutting Pad with foam side
up. Place paper or desired material to be cut on top of the die.
Place the second Cutting Pad or Premium Crease Pad on top of
the paper or material to create a "sandwich."
Bigz XL Dies require Extended Cutting Pads
(sold separately)
Slide the sandwich into the opening of the BIGkick. Note the
rotation of the handle and continue to rotate it in the same
direction until the sandwich has passed through the opening of
the rollers. Remove the sandwich from BIGkick. Your die-cut
shape is ready to use!
LISTED
ÉNUMÉRÉS
LISTADO
Premium
Crease Pad
Paper
Die
Cutting Pad
Dies with crease require
Premium Crease Pad
(sold separately)
"Sandwich"