SIZZIX Big Shot Mode D'emploi

Cutting fabric has never been this easy! The Sizzix® Big Shot™ Machine saves time,
money and e ort with a quick, e cient and easy cutting process. Create your
favorite shapes with ultimate precision from a wide range of fabrics – everything
from quilting cotton and wool felt to annel and template plastic – even several
layers at once!
IMPORTANT SAFETY INSTRUCTIONS
WARNING
– When using this product, basic precautions should
always be followed, including the following:
a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is necessary when this
machine is used near children.
c) Do not contact moving parts.
d) Only use attachments recommended or sold by the manufacturer.
e) Do not use outdoors.
f ) Always place and operate this machine on a clean, at surface.
g) PINCH HAZARD. AVOID ROLLERS.
h) DO NOT OVERLOAD THE MACHINE.
i) CUTTING HAZARD. AVOID CONTACT WITH THE DIE BLADE.
j) ADULT SUPERVISION OF CHILDREN RECOMMENDED.
SAVE THESE INSTRUCTIONS
Slide the sandwich into the opening of the machine. Note the rotation of the
handle and continue to rotate it in the same direction until the sandwich has
passed through the opening of the rollers. Remove the sandwich from the
machine.
Your die-cut shape is ready to use!
Tips & Tricks
All the latest Tips & Tricks and folding techniques to complement the Sizzix Big Shot Machine
are available at sizzix.com/sizzixquilting.
Warranty
This product comes with a limited warranty. Visit sizzix.com/warranties for details.
Notices
US & Intl Patents (see sizzix.com/legal)
Brevets de USA et Intl (visitez sizzix.com/legal)
Patentes de EE.UU. y Intl (visita sizzix.com/legal)
For customer support, please visit sizzix.com
866-742-4447 toll-free in USA
949-598-8821 outside USA
For European customer support, please visit sizzix.co.uk
within UK: 0844 499 8181
outside UK: +44 (0) 845 345 2277
Made in China
Before attaching handle, remove protective cap on crank shaft and discard. Then,
attach handle by sliding washer over hex screw and inserting through handle
and into crank shaft. Tighten hex screw with hex wrench provided in handle kit.
Press end plug over hex screw until rmly sealed.
Place a Bigz or Bigz L die on a Cutting Pad with foam side up. Place fabric on
top of the die (up to eight layers depending upon the material). Place a
second Cutting Pad on top of the fabric to create a "sandwich. "
Bigz XL and XL 25" dies require extended and extended 25" Cutting Pads (sold separately).
022916
Assembly Instructions
Using Bigz™ Dies
Cutting Pad
Fabric
Die
Cutting Pad
PAGE 1