SIZZIX Big Shot Plus Manuel D'instructions

Cutting fabric has never been this easy! The Sizzix® Big Shot™ Plus Machine saves
time, money and e ort with a quick, e cient and easy cutting process. Create your
favorite shapes with ultimate precision from a wide range of fabrics – everything
from quilting cotton and wool felt to annel and template plastic – even several
layers at once!
IMPORTANT SAFETY INSTRUCTIONS
WARNING
– When using this product, basic precautions should
always be followed, including the following:
a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is necessary when this
machine is used near children.
c) Do not contact moving parts.
d) Only use attachments recommended or sold by the manufacturer.
e) Do not use outdoors.
f ) Always place and operate this machine on a clean, at surface.
g) PINCH HAZARD. AVOID ROLLERS.
h) DO NOT OVERLOAD THE MACHINE.
i) CUTTING HAZARD. AVOID CONTACT WITH THE DIE BLADE.
j) ADULT SUPERVISION OF CHILDREN RECOMMENDED.
SAVE THESE INSTRUCTIONS
Slide the sandwich into the opening of the machine. Note the rotation of the
handle and continue to rotate it in the same direction until the sandwich has
passed through the opening of the rollers. Remove the sandwich from the
machine.
Your die-cut shape is ready to use!
Tips & Tricks
All the latest Tips & Tricks and folding techniques to complement the Sizzix Big Shot Plus
Machine are available at sizzix.com/sizzixquilting.
This product comes with a limited warranty. Visit sizzix.com/warranties for details.
US & Intl Patents (see sizzix.com/legal)
Brevets de USA et Intl (visitez sizzix.com/legal)
Patentes de EE.UU. y Intl (visita sizzix.com/legal)
For customer support, please visit sizzix.com
866-742-4447 toll-free in USA
949-598-8821 outside USA
For European customer support, please visit sizzix.co.uk
within UK: 0844 499 8181
outside UK: +44 (0) 845 345 2277
Made in China
"Sandwich"
Warranty
Notices
022916
Assembly Instructions
Crank Shaft
Before attaching handle, remove protective cap on crank shaft and discard. Then,
attach handle by sliding washer over hex screw and inserting through handle
and into crank shaft. Tighten hex screw with hex wrench provided in handle kit.
Press end plug over hex screw until rmly sealed.
Using Bigz™ Dies
Cutting Pad
Fabric
Die
Cutting Pad
Place a Bigz, Bigz L, Bigz XL or Bigz Plus die on a Cutting Pad with foam side
up. Place fabric on top of the die (up to eight layers depending upon the
material). Place a second Cutting Pad on top of the fabric to create a
"sandwich. "
Bigz XL 25" dies require extended 25" Cutting Pads (sold separately).
Washer
Washer Hex Screw
Hex Screw
Crank Shaft
End Plug
End Plug
Handle
Handle
Protective Cap
Protective Cap
PAGE 1