SIZZIX Vagabond 2 Mode D'emploi page 10

Using an Originals™, Bigz™, Movers & Shapers™
1. Place an Originals or Bigz Die on a Cutting Pad with foam side up. Place
paper or desired material to be cut on top of the die. Place the second
Cutting Pad on top of the paper or material to create a "sandwich."
(Bigz XL Dies require
Extended Cutting Pads.)
2. Use the forward/reverse switch to select the proper direction. Slide
"sandwich" into the roller opening as far as it will go. Push in on the side
flaps to align the "sandwich" and gently press the motor button. When
the die "sandwich" is completely through the rollers, then and only then
is it safe to remove or handle your die and die-cut shape.
or On the Edge™ Die
Paper
Die
Cutting Pads
"Sandwich"