Bouton D'alimentation; Removing The Power Button; Installing The Power Button - Dell Precision 7550 Instructions De Service
Masquer les pouces
Voir aussi pour Precision 7550:
- Guide de maintenance (104 pages) ,
- Guide de configuration et des caractéristiques (48 pages) ,
- Guide de configuration et de spécifications (47 pages)
Table des Matières
Publicité
Bouton d'alimentation
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
heat-sink
assembly.
6. Remove the
power button
About this task
The figure indicates the location of the power button and provides a visual representation of the removal procedure.
Steps
1. Remove the two (M2x3) screws that secure the power button in its slot on the computer.
2. Remove the power button from the computer.
Installing the power button
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the power button and provides a visual representation of the installation procedure.
before working inside your
board.
computer.
Démontage et remontage
57
Publicité
Table des Matières
