Installing The Middle Cap - Dell Precision 7550 Instructions De Service
Masquer les pouces
Voir aussi pour Precision 7550:
- Guide de maintenance (104 pages) ,
- Guide de configuration et des caractéristiques (48 pages) ,
- Guide de configuration et de spécifications (47 pages)
Table des Matières
Publicité
2. Remove the middle cap from the computer.
Installing the middle cap
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the middle cap and provides a visual representation of the installation procedure.
Steps
1. Align and insert the middle cap onto the palmrest.
NOTE:
Ensure that the middle cap is secured in place by the two pegs on the palmrest.
2. Replace the four (M2x3) screws to secure the middle cap in place.
Next steps
1. Install the
system
board.
2. Install the
GPU
card.
3. Install the
GPU power
cable.
4. Install the
inner
frame.
5. Install the
heat-sink
assembly.
6. Install the
primary
memory.
7. Install the keyboard.
8. Install the
keyboard
lattice.
9. Install the
WLAN
card.
10. Install the
WWAN
card.
11. Install the
secondary
memory.
12. Install the
SIM
card.
13. Install the
primary M.2
SSD.
14. Install the battery.
72
Démontage et remontage
Publicité
Table des Matières
