Mustang Survival MD3071 Instructions D'emploi page 11

fIGURE 7
3f Manual Inflator
MD3085 Manual Inflator
Service
Indicator
Step 5
4) Raise, and hold, the lever into the inflator housing. Install a new
cylinder/bayonet assembly by engaging bayonet tabs in housing,
pushing in then turning clockwise 1/8 turn to a full stop (fig. 8).
WARNING: PFD WILL ONLY INFLATE IF CYLINDER IS
TURNED TO A FULL STOP.
fIGURE 8
Tab
Piercing Pin
Service Indicator
5) Examine the service indicator (fig. 8) and ensure it is GREEN. If
the service indicator is red, the mechanism has been fired or is
incorrectly fitted and the inflator requires service. See Re-arming
Your PfD (MD3071) p. 7.
NOTE: The service indicator must be green before proceeding.
Cylinder
Step 2
Sensor Ring
Step 3
Bayonet
Tab
Step 4
O-Ring
Step 3
Lever
Step 4
MD3071
MD3085 Manual Inflator
Cylinder
1/8 Turn
Lever
MD3081 and MD3082 Manual Inflator
Tab
Piercing Pin
Service
Indicator
Service Indicator
If green, unit is operable
If red, stop and service unit
Cylinder
8