Remove And Clean The Burner Orifi Ce - Norcold N3000 Serie Manuel D'installation Et D'utilisation

Remove and clean the burner orifi ce
Your dealer or Norcold authorized service center must do this procedure.
Remove and clean the burner orifi ce (See Art00956):
- Close the valve at the propane gas tank(s).
- Push the on/off switch and hold it for 2 seconds to turn off the refrigerator.
!
The burner box cover can be hot. Wear gloves to avoid burns.
CAUTION
- Open the lower intake vent.
- Remove the burner box cover by removing the screw.
!
To avoid possible propane gas leaks, always use two wrenches to loosen and tighten the gas supply line
WARNING
connections.
- Remove the fl are nut from the orifi ce assembly [77] (See Art00956).
- Remove the orifi ce assembly from the burner [78].
Do not try to remove the orifi ce [79] from the orifi ce adapter [80] when cleaning. Removal will damage
!
WARNING
the orifi ce and seal of the orifi ce and can cause a propane gas leak. Leaking propane gas can ignite or
explode which can result in dangerous personal injury or death. Do not clean the orifi ce with a pin or other
objects.
- Clean the orifi ce assembly with air pressure and alcohol only.
- Using a wrench, assemble the orifi ce assembly to the burner.
- Assemble the fl are nut to the orifi ce assembly.
- Examine all of the connections for gas leaks.
- Clean the burner box.
- Assemble the burner box cover.
Installation and Owner's Manual 12
80 78
77
79
Art 00956