Measuring Blood Pressure; Storing Results; Switching Off The Unit; Use - Medisana HGD Mode D'emploi

• Take readings while in a seated position.
4.2
• Relax your arm and rest it lightly on a surface such as a table.
The correct
• Raise your wrist so that the pressure cuff is on the same level as the heart.
position for
• Relax during the measuring process: do not move or talk, as this can affect
taking readings
a. Press the START button
4.3
Measuring
• The display will show the "measuring" symbol with the text „READY".
blood pressure
• The cuff will then inflate. The increasing pressure will be displayed symboli-
• Pressing the START button
b. The measuring process begins automatically when inflation is complete by
c. Initially, deflation occurs at a constant speed.
The unit has 30 memory slots each for 2 potential users. The latest reading will
4.4
automatically be stored under the name of the currently selected user in the next

Storing results

available memory slot.
When the unit is switched off, the stored values can be displayed by pressing
the SELECT buttons ▲▼ . You can then move through the list using the
SELECT buttons ▲▼ .
The values stored in the current memory location are shown in table form
when MENU button
the values are displayed graphically.
The unit switches off automatically after a short time if no further buttons are
4.5
pressed, or can be switched off using the START button
Switching off
showing the date, time and user will remain visible if the menu option
the unit
DISPLAY ON was selected and confirmed in the TIME/ALARM menu.
the results.
cally while the messages „BE QUIET" and „PLEASE RELAX" are displayed
alternately.
cess. The unit switches off and the cuff deflates.
slowly releasing the pressure built up in the cuff. At the same time, a pulse
curve is shown in the display. The messages „DO NOT MOVE" and „DO
NOT TALK", are displayed alternately, reminding you not to do so while the
reading is being taken.
As soon as the pulse can be determined, deflation is synchronised with the
beating of the heart until the measurement ends. During this time the heart
symbol will flash. The measurement is complete when the cuff suddenly
deflates and readings appear on the display under SYS, DIA and PUL.
2 is pressed. When MENU button
4 .
4 during inflation will stop the inflation pro-
GB

4 Use

2 is pressed again,
4 . The display
17