Fitting The Cuff; Correct Position For Taking Readings; Taking Blood Pressure Readings - Medisana MTX Connect Mode D'emploi

GB
4 Operation
4.1

Fitting the cuff

4.2
Correct position
for taking readings
4.3
Taking blood
pressure readings
26
First attach the free end of the cuff's
on the unit. Open up the preformed cuff and slip it over the bare left upper
arm just above the elbow region. If wearing tight clothing, ensure that the
circulation in the arm is not impaired when rolling up the sleeve.
The tube should run along the centre of the inner arm towards the palm of the
hand. Ensure that the cuff itself is not twisted in any way.
Fasten the pressure cuff in such a way that it fits tightly but does not constrict
the arm.
1.
3.
• Take readings while in a seated position.
• Relax your arm and rest it lightly on a surface such as a table. Relax during
the measuring process: do not move or talk, as this can affect the results.
Single reading
1. Press the START button
complete, " " appears on the display. 5 short beeps sound during the
procedure.
air tube to the designated connector
2.
4.
. The device carries out a self test. Once this is