Preparatory Operation; Operation - Fujitsu UTB-UUB Mode D'emploi

PREPARATORY OPERATION

To set the current day and time
1
CLOCK ADJUST
Press the TIMER MODE button for 2
seconds or more. The time display on
the remote controller will flash.
3
Press the SET TIME buttons to set the current time.
Press repeatedly to adjust the current time in 1-minute increments. Press and
hold to adjust the current time in 10-minute increments.

OPERATION

Instructions related to heating are applicable to "HEAT PUMP MODELS" and "HEAT RECOVERY MODELS" only.
To start/stop operation
To set the operation mode
G Operation mode setting
G Room temperature setting
Lower Raise
G Fan speed setting
G Energy save setting
ENERGY
SAVE
En-3
2 DAY
Press the DAY button and select the current day.
A
DAY OFF
SU MO
SU MO TU WE TH FR SA
ex. Monday, 10:00 A.M.
Press the START/STOP button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the MASTER CONTROL button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO COOL
* AUTO and FAN cannot be selected for "HEAT PUMP MODELS."
Press the SET TEMPERATURE buttons to set the room temperature.
Temperature setting range
AUTO ............................................................ 64 to 88 °F
COOL/DRY .................................................... 64 to 88 °F
HEAT ............................................................. 48, 52, 56, or 60 to 88 °F*
* Room temperatures as low as 48, 52, and 56 °F cannot be set depending on the
model.
Press the FAN CONTROL button to set the fan speed.
AUTO HIGH
Press the ENERGY SAVE button to start or stop the energy-
saving air conditioner operation.
* The energy save air conditioner operation is not available
depending on the model.
appears around the selected day.
TU WE TH
CLOCK ADJUST
Press again to end.
DRY FAN HEAT
MED LOW
FR SA