Amann Girrbach Ceramill Map400 Mode D'emploi page 48

I N S T A L L A T I O N
After fine alignment of both jaws:
▷ Start the matching process by clicking on the
E N
The defined points for the fixator registration are stored in the software.
Fig. 18
The registration of the fixator is completed. From now on, all subsequent jaw scans of patient cases are
automatically assigned.
The more accurate the points are set, the more precise the assignment. Small deviations are
permitted, and will be corrected in the matching process!
When the assignment was created incorrectly:
▷ Select
▷ Click on the
▷ Select
▷ Start the registration process by clicking on
48
Options > Service > Reset jaw alignment
Articulation
button.
Manual alignment
Next
button.
to reset the faulty registration.
OK .