Power Pack Disassembly; Disposal - Schluter Systems LIPROTEC LT EK 24V30W Notice D'utilisation

Disconnect the power pack from the mains connection.

For this purpose, loosen the screws (see
use for the power pack
housing covers (see
pack
, fig. D item 2).
Disconnect the mains cable from the power pack and

strip the exposed wires.
You can now disassemble the individual

components of the LIPROTEC system.

12.2 Power pack disassembly

To disassemble the power pack, proceed as follows:
Loosen the wires of the 24 V connection cable.

Loosen the screws fastening the power pack.


13 Disposal

This product must not be disposed of in domestic
waste within the EU. The recyclable materials
contained in old components must be recycled. The
environment and/or human health must not be
damaged by unmonitored waste disposal. Please
dispose of old components through suitable
collection systems or send the component to the
place where you purchased it for disposal. The
component is then sent to material recycling.
Directions for use for the power pack
, fig. D item 3) and remove the
directions for use for the power
EN
Disposal
directions for
61