Elimination Of Faults; Fault Table - Schluter Systems LIPROTEC LT EK 24V30W Notice D'utilisation

EN

Elimination of faults

10 Elimination of faults
Electric shocks are possible from incorrect correction of
the power pack.
Electric shocks can lead to severe or deadly injuries.
Make sure that only authorised professionals

connect the LIPROTEC-System to the mains
voltage.
Before beginning work, make sure that the mains

cable is not live.
Close all coverings on the power pack after work.


10.1 Fault table

Fault Cause of fault
Circuit Power pack
breaker is incorrectly
triggered connected
Power pack
defective
No Connections
lighting mixed up
No voltage
present
58
DANGER
Troubleshooting
Connect power pack
correctly (only by qualified
electrician).
Replace power pack (only by
qualified electrician).
Check that all cable
connections are connected
properly.
Check that the power pack is
connected properly.
Directions for use for the power pack