Conditions For Use; Basic Safety Instructions - Schluter Systems LIPROTEC LT EK 24V30W Notice D'utilisation

EN
Safety
by soldering. The component of the LIPROTEC system must
not be used in the wrong combination.
Intended use includes the reading and understanding these
instructions and the observance and following of all
information in these instructions, especially the safety
instructions.
Any other use is expressly considered not to be intended and
leads to an expiration of the warranty and liability claim.

2.2 Conditions for use

Make sure that the power pack is used only under the
following surrounding conditions:
Temperature: -20 °C to +45 °C

Relative humidity for the power pack and terminal

connections: 45 % to 85 %
Make sure that the scope of protection is observed according
to DIN VDE 0100-7001 when the components are used in
bathrooms or wet rooms.

2.3 Basic safety instructions

2.3.1 Preventing severe and deadly injuries
Electrical shocks are possible when connecting the

power pack.
– Make sure that the power pack is connected to the
mains connection by qualified electricians only.
– Make sure that all other work is performed only by
qualified, expert personnel.
38 Directions for use for the power pack