Schluter Systems LIPROTEC LT EK 24V30W Notice D'utilisation page 42

– Before connecting the components, make sure the
power pack is not energised.
– Connect the LED strip or receiver only to the power
pack and not directly to the mains connection.
There is a possibility of electrical shocks when installing

moist components.
– Only store the components in the closed original
packaging.
– Protect the components from moisture.
– Do not install moist components.
– Adhere to the relevant regulations for electronic
devices at the place of use.
– Adhere to the protection classes of the components.
– Adhere to the scopes of protection in accordance
with DIN VDE 0100-701. Observe country-specific
deviations and the locally applicable regulations.
There is a possibility of electric shocks when installing

components with damaged insulation.
– Mechanical loads may damage the components.
Protect the components from mechanic overload
and damage. Do not use any damaged
components.
– Only open the component housing at the indicated
place. Do not use force.
Electric shocks from incorrectly connected cables are

possible.
– Connect the cables only with the provided terminal
connectors.
Directions for use for the power pack
EN
Safety
39