2.8 Warning and information signs
Symbol
Explanation
PROTECTION CLASS I: For the connection cable
to the mains ground wire. The symbol is mounted
to the connection point.
PROTECTION CLASS II: The item has a protective
insulation and requires no ground cable
connection.
The item is suitable for mounting onto or into
furniture made of material with no known ignition
properties.
The item is suitable for direct assembly on normally
flammable surfaces. Normal flammable surfaces
are materials such as wood and materials on a
wooden basis with a thickness of no more than 2
mm.
Safety Extra Low Voltage
Short-circuit-proof safety converters or safety
transformers (automatic restart after
troubleshooting).
The product is temperature-protected up to the
specified temperature.
Components with this symbol may only be used
indoors (dry spaces).
This product complies with the requirements of
Directions for use for the power pack
EN
Safety
43