Seam Guide - Singer S800 Manuel D'instruction

MAGNIFYING GLASS
1. Attach the magnet of magnifying glass onto the metal
plate on the face cover of sewing machine.
2. Adjust the position of the glass so that you may see
needle hole and needle threader clearly.

SEAM GUIDE

Set the Seam Guide onto the needle plate, aligning the left
edge with the desired seam allowance. As you sew, keep the
right edge of the fabric even with the left edge of the guide.
This provides consistent seam allowance width.
BEADING FOOT
*Optional Purchase
T h i s f o o t i s u s e d t o a t t a c h b e a d s t r i n g s f o r s u r f a c e
embellishment.
Note: This foot will accommodate bead strings with a
maximum width of 5mm.
1. Snap on the Beading Foot.
2. Thread the top of the machine with invisible thread and the
bobbin with sewing thread that matches the color of the
fabric.
3. Place the bead string under the foot, making sure it is
centered in the groove on the underside of the foot. Pull
a small length of the bead string out the back of the foot
to hold while you start sewing. Place stabilizer under the
fabric.
4. Testing on a scrap fabric, select a zigzag stitch, with the
width setting wide enough to go over the bead string without
hitting the bead string. Check by turning the hand wheel
toward you slowly to make sure the swing of the needle
clears the bead string.
5. Stitch the bead string, sewing slowly. Depending on the
fabric being sewn, it may be necessary to reduce upper
thread tension slightly.
6. Pull the work out toward the back of the presser foot to
78
Aimant
Iman
Seam guide line
Ligne du guide droit
Línea guía de costura
Plaque métale
Plancha de metal
Cloth guide
Guide du tissu
Guía de prendas