3M PROTECTA REBEL Manuel D'instructions page 6

;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
DESCRIPTION:
Figure 2 identifies key components of the Protecta Rebel Self-Retracting Devices (SRDs). Rebel SRDs are drum wound Web
Lifelines (A) which retract into a Thermoplastic Housing (B). They can hang from anchorage by a Carabiner attached through the
Swivel Eye (C) on the top of the SRD. A Self-Locking Snap Hook (D) on the end of the Lifeline attaches to the designated Fall
Arrest connection on a Full Body Harness.
Figure 1 defines the Rebel SRD models covered by this instruction manual.
Hook Description
2000161 Self-Locking Snap Hook
2000178 Swiveling Self-Locking Snap Hook
2000188 Carabiner
9500796 Self-Locking Snap Hook
2000164 Self-Locking Snap Hook
Lifeline:
Maximum Arrest Force:
Average Arrest Force:
Maximum Arrest Distance:
Table 1 – Specifications
Material
Zinc Plated Steel
Zinc Plated Steel
Anodized Aluminum
Zinc Plated Steel
Zinc Plated Steel
1 in x .056 in Polyester Web - Min Tensile Strength 20 kN (4,500 lbs)
6 kN (1,350 lbs) for 140 kg (310 lbs) Capacity
4 kN (900 lbs)
1.1 m (42 in)
6
Gate Strength Throat Size
16 kN (3,600 lbs) 1.9 cm (0.75 in)
16 kN (3,600 lbs) 1.9 cm (0.75 in)
16 kN (3,600 lbs) 5.2 cm (2.05 in)
16 kN (3,600 lbs) 1.7 cm (0.68 in)
16 kN (3,600 lbs) 6.0 cm (2.38 in)