Renkforce TP-1000 Notice D'emploi page 31

Copying function
• Prepare the recording by performing the steps described in „recording".
• Insert the cassette to be copied into drive A.
• Select the copying speed:
Push the button DUBBING (10) to copy the cassette at regular tape speed.
Push the button HI.SP.DUB (9) to copy the cassette at double tape speed.
If possible, set the regular copy speed, since this will improve audio quality.
Do not change the copying speed during playback.
• Depending on the copying speed set, the corresponding control LED in the display (4) above the button
DUBBING (10) or HI.SP.DUB. (9) will light up.
• Push the button 3 PAUSE at drive B.
• Push the buttons
• Push the button 6 PLAY of drive A and concurrently the button 3 PAUSE at drive B. Copying starts.
• During copying, a right indicator LED lights up in the display (4) at the upper right.
• Push the button 5 /
• Push the button 5 /
Fast copying is automatically stopped when the tape end has been reached.
REC and 6 PLAY of drive B at the same time.
STOP/EJ. at the two drives to stop the recording.
STOP/EJ. at both drives again to remove the inserted cassettes again.
31