Playing A Cassette; Fast Forward/Rewind - Renkforce TP-1000 Notice D'emploi

a) Playing a Cassette
• You can play back cassettes in both drives (deck A and B).
• Push the button POWER (1) to switch on the device.
• Push the drive button 5 /
• Insert the recorded cassette into the drive with the tape opening down.
• Close the drive cover again.
• Slecet the tape input at your amplifier.
• In case of a CrO2-cassette, push the button PLAY CrO2 (11). With the button activated, a green control ID
lights up in the display (4) above the button.
• Put the switch NOISE REDUCTION (3) into the position appropriate for the cassette:
Cassette has been recorded with noise reduction system > Push switch into the ON position.
Cassette has been recorded without noise reduction system > Push switch into the OFF position.
• Push the button 6 PLAY.
• Playback commences.
• Push the button 3 PAUSE again to interrupt playback briefly. To continue the playback, push the button
3 PAUSE again.
• Push the button 5 /
• Push the button 5 /
Playback is stopped automatically when the tape end has been reached.
b) Fast Forward/Rewind
• Before fast forwarding or rewinding the cassette, you have to terminate playback with the
button 5 / STOP/EJ.
• Push the button 66 FF to fast forward the cassette.
• Push the button 44 REW to rewind the cassette.
• Push the button 5 /
Fast forwarding or rewinding is stopped automatically when the tape end has been reached.
STOP/EJ. The corresponding cassette drive (2) opens.
STOP/EJ. once to stop playback.
STOP/EJ. again to remove the inserted cassette.
STOP/EJ. to stop fast forwarding or rewinding.
29