Safety Information - Renkforce TP-1000 Notice D'emploi

5. Safety Information

The warranty/guarantee will expire if damage is incurred resulting from non-compliance with
these operating instructions. We do not assume liability for any consequential damage.
Nor do we assume any liability for damage to property or personal injury caused by improper
use or failure to observe the safety instructions. In such cases the warranty/guarantee is vo-
ided.
Dear Customer: The following safety information is intended not only for the protection of the
device but also for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not
permitted.
• This device is a safety class II product. Only a proper mains socket (230 V/50 Hz) of the public
mains supply must be used as a power source.
• Ensure proper commissioning of the device. Observe the operating instructions for it.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under
mechanical stress. Avoid excessive thermal stress on the mains cable from extreme heat or
cold. Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged
mains cable can cause a deadly electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
(e.g. via the respective circuit breaker and FI switch) and then carefully pull the mains plug
from the mains socket.
• In order to completely separate the device from the mains, you have to pull the mains plug out
of the wall socket. It is not sufficient to turn the device off with the on/off switch.
• This product is not a toy and not suitable for children. Children cannot judge the dangers in-
volved when handling electrical devices.
• Never pour liquids on electrical devices and do not place any containers filled with liquids
(e.g. vases) on them. There is great danger of fire or potentially fatal electric shock. If this is
the case, first power down the respective mains socket (e.g. switch off circuit breaker and FI
switch) and then pull the mains cable from the socket. Disconnect all cables from the device.
Do not operate the product anymore afterwards, but take it to a specialist workshop.
• Never plug in or unplug the mains plug when your hands are wet.
• Make sure the device is sufficiently ventilated when in operation. Do not cover the ventilation
openings with magazines, blankets, curtains or similar.
• Do not expose the device to any high temperatures, dripping or splashing water, strong vibra-
tions or heavy mechanical stress.
• Do not place any open sources of fire, such as burning candles, on the device.
22