Renkforce TP-1000 Notice D'emploi page 28

(5) Tape Counter for Deck B
With the help of this tape counter, you can find specific points of the tape.
Push the button next to the counter to reset it to 000.
(6) Controller REC LEVEL
This controller serves to adjust the signal level at recording (only active when recording from external
audio sources; when recording from deck A, the recording is switched off automatically).
(7) Drive buttons
REC
6 PLAY
44 REW
66 FF
5 / STOP/EJ.
3 PAUSE
(8) Button REC CrO2
Push this button to record an CrO2-cassette (chrome cassette).
(9) Button HI.SP.DUB.
Use this button to activate the quick copying function from deck A to deck B (always use only in connec-
tion with the button DUBBING (10)).
(10) DUBBING button
This button activates the copy function from deck A to deck B.
(11) Button PLAY CrO2
Push this button to play a CrO2-cassette.
28
Push this button at the same time as 6 PLAY to start recording.
Push this button to activate playback.
Push this button to rewind the cassette.
Push this button to fast forward the cassette.
Push this button once to stop the drive function.
Push it again to open the cassette compartment.
Push this button to interrupt the playback or recording
briefly. Push again to switch off the pause function.