Chapter 3. Machine Usage Conditions; Max. Weight And Dimensions Of The Package; Machine Operating Conditions; Items That May Be Packaged - Minipack-Torre Tunnel 50 Twin Mode D'emploi

Chapter 3. Machine usage conditions

3.1. Max. weight and dimensions of the package

Tunnel 50Twin
a = mm1140 b = mm380
Tunnel 70
a = mm1200 b = mm500
Note: The weight to be considered is the total weight distributed on the conveyor belt,
and not the one of the single package.

3.2. Machine operating conditions

Do not makes packages as big or larger than the tunnel clearance.

Leave at least 5cm on each side.
Do not carry out packages whose dimensions are lower than the rods pitch of the conveyor belt.

The product fall between the rods could cause remarkable damages to the belt itself.

3.3. Items that may be packaged

These machines are capable of packing a wide range of completely different products.
They are used successfully in the following sectors: food, marketing, graphics and mailing, large distribution, industry,
fabrics.

3.4. Items which must not be packed

The products listed below must absolutely not be wrapped to avoid permanent damage to the machine and serious
injuries to the operator:
Wet and unstable products

Liquids of any kind and density in fragile containers

Flammable and explosive materials

Pressurised gas cylinder of any kind

Bulk and volatile powders

Any materials and products not listed but which might harm operator and cause damages to the

machine.
c = mm190 Max weight =
c = mm350 Max weight = Kg 100
16
Kg 60
EN