Chapter 3. Machine usage conditions
3.1. Max. weight and dimensions of the package
a = 740mm
b = 380mm
c = 220mm
Max weight = 60Kg
NOTE: The weight to be considered is the total weight distributed on the conveyor belt,
and not the one of the single package.
3.2. Machine operating conditions
Do not makes packages as big or larger than the tunnel clearance.
Leave at least 5cm on each side.
Do not carry out packages whose dimensions are lower than the rods pitch of the conveyor belt.
The product fall between the rods could cause remarkable damages to the belt itself.
3.3. Items that may be packaged
These machines are capable of packing a wide range of completely different products.
They are used successfully in the following sectors: food, marketing, graphics and mailing, large distribution, industry,
fabrics.
3.4. Items which must not be packed
The products listed below must absolutely not be wrapped to avoid permanent damage to the machine and serious
injuries to the operator:
Wet and unstable products
Liquids of any kind and density in fragile containers
Flammable and explosive materials
Pressurised gas cylinder of any kind
Bulk and volatile powders
Any materials and products not listed but which might harm operator and cause damages to the
machine.
16
EN