Horizon Fitness ELITE T7 Guide D'assemblage page 8

ASSEMBLY STEP 8 (T9 ONLY)
T9
5 H 11
10
1
14
HZ14_AG_Elite_T7_T9_r1_2.indd 14-15
HARDWARE FOR STEP 8
PART TYPE QTY
H SCREW 6
*This step is for T9 models only.
A Fold the deck into the upright position until the
FOOT LATCH (10) engages.
B Open HARDWARE FOR STEP 8.
C Silde the MAIN FRAME COVERS (5) down
over the MAIN FRAME (1). The notches on
the inside of the covers should align with the
SPACERS (11).
D Attach MAIN FRAME COVERS (5) to MAIN
FRAME (1) using 4 SCREWS (H).
E While holding the deck with both hands, press
the FOOT LATCH (10) with your foot to lower
the deck to the ground.
T9 ASSEMBLY COMPLETE!
15
7/2/14 3:55 PM