Horizon Fitness ELITE T7 Guide D'assemblage page 5

ASSEMBLY STEP 2
2
D
1
C
B
8
HZ14_AG_Elite_T7_T9_r1_2.indd 8-9
HARDWARE FOR STEP 2
PART TYPE QTY
B BUTTON HEAD BOLT 4
C SPRING WASHER 4
D FLAT WASHER 4
NOTE: Do not fully tighten bolts until step 6.
A Open HARDWARE FOR STEP 2.
B Attach LEFT CONSOLE MAST (2) to MAIN
FRAME (1) using 4 BOLTS (B), 4 SPRING
WASHERS (C) and 4 FLAT WASHERS (D).
ASSEMBLY STEP 3
D
4
3
1
HARDWARE FOR STEP 3
PART TYPE
B BUTTON HEAD BOLT
C SPRING WASHER
D FLAT WASHER
NOTE: Do not fully tighten bolts until step 6.
C
B
NOTE: Be careful not to pinch the console
cable while attaching the right console mast.
A Pull the CONSOLE CABLE (3) away from the
treadmill base frame. Connect the CONSOLE
CABLE (3) from the MAIN FRAME (1) to the
CONSOLE CABLE (3) in the bottom of the
RIGHT CONSOLE MAST (4). The other end of
the CONSOLE CABLE should be located at the
top of the mast.
B Open HARDWARE FOR STEP 3.
C Attach RIGHT CONSOLE MAST (4) to MAIN
FRAME (1) using 4 BOLTS (B), 4 SPRING
WASHERS (C) and 4 FLAT WASHERS (D).
QTY
4
4
4
9
7/2/14 3:55 PM