TOPRO TROJA Manuel D'utilisation page 10

TOPRO
TROJA ROLLATOR
Assembling / adjusting
TOPRO TROJA
D
is delivered assembled. Before use, you must
unfold the rollator. The height of the handle-
bar tubes must be adjusted to suit the user.
A
Unfolding
A
A
Loosen the lock clamp that is over the seat bars
B
Press the seat bars down and out The side
frames will slide apart and the seat bars are
B B
pressed down. You will hear a clicking sound.
The rollator is now locked in an unfolded position.
Folding
C
C
Pull the strap on the seat and press the side
D
frames together. Press the locking clamp over
CLICK
the seat bars.
F
Lowering the handles
E
Unscrew the lock wheel for the brake handles
(approx. 3-4 turns). Push the handlebar tubes
F E
down until they stop Tighten the lock again.
Height adjusting
the handlebar tubes
E
Unscrew the lock for the brake handles
(approx. 3-4 turns). Adjust the handlebar tubes til
G
a suitable height then pull them slightly up and
G
down until you hear a clicking sound.
E
Tighten the lock again.
Adjust both the handlebars to the same height.
The handlebars should be the same
height as the users wrists when the arms are
E
straight down.
10
www.TOPRO.no